The Metal Bedside Table with USB Charging integrates cold-rolled steel framing with a built-in electrical station for residential and commercial spaces. Built with a modular knock-down structure, this unit incorporates power outlets and USB ports directly into the chassis to manage device cords. An electrostatic powder-coated finish provides surface protection against scratches and moisture in high-turnover environments.
Key Features
Built-In Charging Station:
Dual AC outlets and dual USB ports supply direct power for mobile devices and bedside accessories.
Cold-Rolled Steel Frame:
Heavy-gauge steel chassis maintains square alignment and structural rigidity under continuous daily load.
Flat-Pack Modular Design:
Precision-punched panel components assemble using standardized metric fasteners, minimizing packaging volume.
Corrosion-Resistant Finish:
Thermoset powder coating seals the steel substrate against humidity, rust, and surface wear.
Dual-Zone Storage:
A smooth-running steel drawer paired with an open bottom shelf organizes personal items and bulkier goods.
Leveling Floor Glides:
Threaded steel foot pads adjust to balance the unit on uneven surfaces while protecting flooring materials.
Functional Design
Recessed Power Housing: The power strip sits flush within the top rear shelf to maintain a flat main surface and guard electrical components against liquid contact.
Concealed Cable Routing: Stamped rear panel pass-throughs route main power cords straight out the back, allowing placement tight against walls.
Steel Ball-Bearing Slides: Drawer channels operate on cold-drawn steel ball tracks for steady, low-friction extension.
Deburred Edge Geometry: All sheet metal edges undergo machine deburring and corner radius profiling to eliminate sharp steel burrs.
Wall-Anchor Points: Factory pre-drilled rear frame holes accommodate wall-mounting hardware for structural stability.
Bedroom Applications
Residential Bedrooms:
Functions as a bedside console with integrated night-lamp and smartphone charging access.
01
Multi-Family Housing:
Fits compact floor plans by consolidating nightstand storage with a central charging outlet.
02
Hospitality Units:
Supplies accessible power connections for guests while standing up to frequent cleaning cycles.
03
Student Dormitories:
All-steel construction resists high-impact wear and structural stress in shared living spaces.
04
Rental Properties:
Surface coating cleans easily between tenant transitions, reducing maintenance demands.
05
Technical Specifications
|
Parameter |
Technical Standard |
|
Overall Dimensions |
400 mm (W) x 350 mm (D) x 580 mm (H) |
|
Primary Material |
Cold-Rolled Steel (SPCC) |
|
Sheet Thickness |
Frame: 0.8 mm - 1.0 mm / Drawer & Shelf: 0.6 mm - 0.7 mm |
|
Tabletop Option |
Cold-Rolled Steel Sheet / Engineered Wood Top |
|
Internal Storage |
1 Steel Drawer + 1 Lower Open Shelf |
|
Electrical Module |
2 AC Outlets (120V/12A or 230V/10A) + 2 USB Ports (5V/2.1A-3.1A) |
|
Power Cord |
1.8 m Heavy-Duty Cord with Region-Specific Plug |
|
Safety Compliance |
UL / ETL / CE / FCC / RoHS Certified |
|
Weight Capacity |
Top: 50 kg / Drawer: 15 kg / Bottom Shelf: 20 kg |
|
Surface Treatment |
Electrostatic Epoxy-Polyester Powder Coating (60-80 $\mu\text{m}$) |
|
Structure |
Flat-Pack Knock-Down (KD) |
Manufacturing Process
Metal Cutting: Fiber laser cutting and automated turret punching for precise panel dimensions.
CNC Bending: Computer-controlled press brakes form panel flanges and structural channels.
Resistance Welding: Spot welding secures inner frame supports and slide mounting brackets.
Surface Pretreatment: Multi-stage degreasing, acid pickling, and phosphate conversion coating.
Powder Coating: Automated electrostatic spray application followed by thermal curing at 200 degrees Celsius.
Component Assembly: In-line installation of drawer slides, electrical modules, and leveling feet.
Quality Testing: Functional power testing, coating thickness measurement, and structural alignment checks.
Flat Packaging: Individual panel wrapping with corner protection into corrugated cartons.
Customization Options
Dimensions: Height, width, and depth tailored to specific room requirements and bed heights.
Frame Profile: Square tubing, round pipe, or stamped sheet metal side panel configurations.
Tabletop Materials: Powder-coated steel, melamine-faced board, or natural wood veneer panels.
Storage Layout: Single drawer, double drawers, open cubby, or perforated steel locker door.
Electrical Configurations: Country-specific plug types, USB-C fast-charging ports, or wireless charging pads.
Color Palette: Standard powder coat colors selected from any classic RAL color chart.
Packaging Solutions: Mail-order packaging designed for parcel transit with customized box printing.
Quality Control Standards
Raw Material Verification: Digital caliper checks for steel coil thickness tolerances and chemical composition verification.
Dimension Tolerance Checks: Laser cut and bent panels verified within a 0.2 mm variance margin.
Coating Adhesion Testing: Cross-hatch cut testing and dry film thickness gauge measurement per production batch.
Electrical Line Safety: 100% testing of power modules for ground continuity, high-voltage resistance, and current output.
Drawer Slide Fatigue Test: Mechanical cycling of drawer assemblies through 10,000 extension cycles under maximum rated weight.
Packaging and Logistics
Panels separated by poly-foam sheets, reinforced with high-density edge guards in 5-ply corrugated cartons.
Packaging designed to meet standard drop-test criteria for mail-order handling.
Flat-pack volume permits up to 1,200 units packed into a standard 40-foot high-cube container.
Blister-packed assembly hardware, hex tools, and step-by-step assembly diagrams included in every box.
Frequently Asked Questions
Q: Are the electrical sockets and USB charging modules certified for import into North America and Europe?
A: Yes. All internal power strips, USB charging ports, and power cords carry valid UL, ETL, CE, and FCC safety test certifications required for those regional markets.
Q: Can the USB charging module be updated to include USB-C fast-charging ports?
A: Yes. The modular power unit can be supplied with USB-A, USB-C fast-charging ports, or top-mounted wireless charging pads based on project requirements.
Q: How long does assembly take for the end-user?
A: Assembly takes approximately 15 to 20 minutes. Each package contains numbered panel parts, pre-drilled holes, labeled hardware packs, and an illustrated instruction manual.
Q: What color options are available for volume production orders?
A: Matte Black, Pure White, and Industrial Grey are standard options. Any custom powder coat shade can be matched to a specified RAL color code for volume runs.
Q: What is the typical production lead time for bulk container orders?
A: Standard production time is 30 to 35 days following final technical drawing sign-off and deposit receipt.
Hot Tags: metal bedside table with usb charging, China metal bedside table with usb charging factory, Configurable Modular Bed Frame, High Profile Bed Frame, Powder Coated Steel Bed Frame, Small Space Modular Bed Frame
